65W dental lab micromotor dental polishing machine high power carving/cutting/polishing/drill strong 204 dental micromotor
Strong 204 dental micromotor machine is an instrument made with motor to use like the pencil and used for working with the turning force from the revolving motor up to 35000rpm. And it is applied to cutting, grinding, polishing. The Strong 204 dental micromotor is a valuable tool in modern dentistry, providing reliable performance and versatility for a range of procedures. Its design enhances precision and efficiency, contributing to better patient outcomes and satisfaction.
Feture of strong 204 dental micromotor
1. Foot pedal:
Foot pedal to free your hands. No need to press the power switch. Just put it on the pedal and the engine will start.
2. Large handle:
High precision, long service life. Stable operation even at high speed. No vibration and low noise.
3. Drinking water polisher:
Equipped with head fast loading mechanism, effective locking, high speed. Low variation and safety under low voltage machine.
4. Power supply:
Stable power supply, overload protection, efficient converter, foot operated, non-polarized speed adjustment.
5. Stable performance:
Produced polishers work stably, at high speed, polish quickly, equipped with a head lock.
6.Multifunctional:
Combination of fast polisher conversion and multifunctional power supply. Carving, engraving, grinding, sharpening, buffing, polishing
7. Application:
Can be used in dental clinic/hospital/lab nail salon, beauty salon, spa or personal manicure, pedicure, etc.
8. Practicality:
Rotary forward/reverse switch, suitable for right or left handers, foot pedal included.
Advantage of strong 204 dental micromotor:
1.Mini-compact design, easy to carry
2.Less-vibration standard carbon brush motor
3.Non stage speed control system
4.Rotating converts forward and reverse control ability dental micro motor
5.Easy maintenance of carboloy brush, no sparkle
6.Disturbance and have better torque and durability
7. Foot pedal for On/off switch
Packing list of strong 204 dental micromotor:
1pcs x main contral machine
1pcs x mircomotor handpiece
1pcs x foot switch
1pcs x mircomotor handpiece shelf
1pcs x repair wrench
Note:
1. Please keep the equipment dry.
2. Please choose the correct power according to the voltage.
3. Make sure the drill clamp is locked before use.
4. Please stop using if you find something strange or noisy.
5. Please change the speed gradually, do not adjust with large adjustments.
6. Don't touch the details when running. This is dangerous.
7. Please stop working if you want to change the rotation direction.
How to Remove and Install the Collet
1.With knurled Chuck Handle in"R"release position and bur or accessory in collet, place triangular hole in Chuck Wrench over triangular flats of Collet head&unscrew the collet counter-clockwise Remove collet.
2. With bur or accessory in new collet, thread into handpiece. Place triangular hole in Chuck Wrench over triangular flats of Collet head and tighten the collet clockwise. Be careful not to over-tighten. Test to insure that new collet releases accessory smoothly in the "R" released position. Test to insure that new collet holds firmly in the "S" secure
Changing Accessories
Burs and other accessories can be inserted or removed from the handpiece collet when the collet is open. To open the collet:
1. Turn off the motor using the Motor On/Off Switch 3 and the Power Switch.
2. Twist the Chuck Handle in the "R" or release direction (clockwise) until the raised indicator bar clicks into the far left mark on the silver center ring.
3. Remove the accessory and replace with another accessory. Insert the 'new' accessory shank fully into the collet for maximum support. You should feel it touch the back of the collet.
4.Twist the knurled Chuck Handle toward the "S" or secure position by turning counter-clockwise until it snaps to lock the collet.
The accessory and the collet will be able to spin freely. The raised collet indicator bar will be above the far right mark in the
silver center ring. Note: The intermediate position between "S" and "R" holds both the spindle and the accessory in a locked position. This is useful to unscrew an over-tightened mandrel screw.
Maintenance advice
1) please keeps clean and dry around the rotation of the handle
2) when there is dust and dirt inside or outside the handle, please wipe it with a little alcohol, but avoid a large amount of alcohol or moisture penetrating into the bearing. The inside of the handle cannot be fill with oil (the bearing will become too hot to use), nor the water (the bearing will rust and damage)
3) you can use an air gun to clean it, but pay attention to the gas from the air gun may contain moisture. Be sure to avoid water vapor blowing into the bearing to prevent rust.
